2014 Graduate student Vasilyev A.A. participation in 11th International Conference Electron Beam Technologies EBT 2014, Varna, Bulgaria

pdf

2012-2013 The six-month internship Assoc. A. Maslennikov grant "Mikhail Lomonosov" RF Ministry of Education and the German Academic Exchange Service at RWTH, Aachen, Germany.  
2012 E.A.Strakhova defended PhD thesis "Mathematical modelling of thermal and deformative processes plasma cladding of copper alloy on steel and structural transformations into corps designs". Tula, TSU, tutor: prof. W.A.Sudnik.

Foto

2011 ARC WELDING. Edited by: Wladislav Sudnik

http://code-pdf.com/arc-welding-ed-by-wladislav-sudnik

http://cdn.intechopen.com/books/images/1479.jpg

2010 Participation of Sudnik W. in the 5th International conference “Mathematical Modelling and Information Technologies in Welding and Related Technologies”. Katsively vil., Crimea, Ukraine. 2010.

 

2010 3d Electronic Scientific and Technical Conference: Computer Technologies in Joining of Materials 2-30 April.

 

2009 Participation of PhD Yuriy Levin and PhD Alexander Maslennikov in the 9th International Seminar "Numerical Analysis of Weldability - 2009" Graz, Austria.

 

2008 A.Maslennikov defended PhD thesis "Development of the technological process of orbital welding on the basis of the optimization of the regime parameters". Moscow, MOSCOW STATE AVIATION TECHNOLOGICAL UNIVERITY, scientific edviser Erofeew V.A.

 

2008 Y. Levin defended PhD thesis "Research and development of the pulsed laser welding of thin walled aluminum structures". Moscow, MOSCOW STATE AVIATION TECHNOLOGICAL UNIVERITY, scientific edviser Erofeew V.A.

 

2007-2008 DAAD grant provided scientific training of PhD A. Maslennikov (Bayreuth, Germany) 
2007 2th Electronic Scientific and Technical Conference: Computer Technologies in Joining of Materials 15-28 december  
2005 Prof. Sudnik W.A., Prof. Protopopov A.A., Rybakov A.S. were awrded the badges "For merits before the university", because of the 75th anniversary of TSU  
2005 Prof. Sudnik W.A. took his part in the meeteng of the national welding committee, 04.10.2005 in Central research institute of structural materials" Prometey", St. Petersburg  
2005 Prof. Sudnik W.A. participated in the exhibition "Schweissen&Schneiden", Essen 2005 Foto
2005 Dr. Sc. Ch. Heimerdinger (Munich) and Dr. Sc. V. Ploshikhin (Bayreuth) visited TSU, the center ComHighTech and Tolstoy's estate "Yasnaya Polyana"; presentations by post. students Zabirov, Levin, Logvinov, Maslennikov and Protopopov Foto
2005 V.A. Erofeev participarted in the 1st meeteng of the INTAS group on simulation of beam welding technologies and virtual testing INTAS project
2005 In the section "Welding production" of the Russian engineering academy there was founded the subsection"Information and computer technologies" Subsection REA
2005 Prof. W.A. Sudnik was elected an adviser of the REA, St. Petersburg  
2005 Participation in the international conference "Laser technologies LAT 2005" 3 papers SPIE, USA
2005 The collection of articles "News of TSU", series "Computer technologies in joining of materials", issue 3, 2005, was published Collection
2004 1th Electronic Scientific and Technical Conference: Computer Technologies in Joining of Materials

On the Internet

2004 Rybakov A.S. defended his doctoral thesis: “The Design of the Regime Parameters for Arc Welding of Metallic Structures”. Moscow, MSATU n.a. Tsialkovsky, tutors: prof. W.À. Frolov and W.A. Sudnik. WIGSIM
2004 Probation of junior research assistant A.F Zabirov by the M.  Lomonosov grant of the Ministry of High Education and DAAD into the ISF - Welding Institute, Aachen, Germany.  
2004 Sudnik W.A. was awarded the Golden Pin by the ISF - Welding Institute, Aachen, Germany  
2004

Tula State University, department "Equipment and Technology of Welding and Foundry Production" received a certificate for correspondence to the requirements IAB-001-2000/EWF-416. It allows training for the following categories of personnel:

  • IWE - international welding engineer;

  • IWT international welding technologist;

  • IWS - international welding specialist;

  • IWP - international welding practitioner;

  • IWI-C, S, B - international welding inspector.

Training center by the programs of the International Institute of Welding
2003 Monograph by Pavele L.A. Modeling of Physical and Chemical Processes in Laser Cutting was published. Monograph
2003 4th All-Russian Scientific and Technical Conference: Computer technologies in Joining of Materials. Collection of the papers
2003 Sudnik W.A. was presented the Sossenheimer software innovation award of the International Welding Institute for his outstanding scientific and technical work on modeling and simulation in the field of welding and allied processes. This award was presented for the first time.
2003 Probation of Post.St. R.V. Logvinov by the Ministry of High Education grant into the ISF - Welding Institute, Aachen, Germany. His subject was “Development of Physico-mathematical Model for the Arc Plasma, Including Its Near-electrode Zones”.  
2003 ÇZaitsev O.I. defended his Ph.D. Thesis: Prediction of Regime Parameters in Pulsed Arc Welding of Aluminum Alloys. Moscow, MSATU n.a. Tsialkovsky, tutor: A.S. Rybakov

TSIM,
MIGSIM

2002 Monograph by W.A. Erofeev: Forecasting of Electron Beam and Laser Welding Quality on the Basis of Computer Modeling was published. Monograph
2002 Monograph by A.S. Rybakov Physic-mathematical Model for Pulsed Arc Welding of Aluminum Alloys was published Monograph
2002 E.W. Karpuchin defended his Ph.D. Thesis: “Mathematical Modeling of Laser Welding by Interrupted Seams for Lap Joints”. Tula, TSU, tutors: prof. W.A. Sudnik, prof. A.A. Protopopov.  
2001 3rd All-Russian Scientific and Technical Conference: Computer technologies in Joining of Materials. Collection of the papers
2001 O.A. Mokrov defended his Ph.D. Thesis: Modeling of the Weld Shape Formation for Fillet Joints and Optimization of MIG/MAG welding of Steels. Moscow, MSATU n.a. Tsialkovsky, tutor: W.A. Sudnik.

MAGSIM,
WINDOWS
,
v
. 3.0

2001 W.A. Sudnik’s participation in the 7th Int. Conf. High Productivity Joining Processes with a report on Simulation of Pulsed MIG-Welding of Aluminum Alloys, Aachen, Germany. Publication
2001 The DaimlerChrysler Corp. presented W.A. Sudnik an award for special achievements in mathematical modeling and numerical simulation for industrial goals.  
2000 W.A. Sudnik’s participation in the International Conference on Computational Engineering & Sciences, Section Computational Weld Mechanics and Welded Structures section, with a report on Computational Weld Thermodynamics, Los Angeles, USA. It was dedicated to the concept of the computational link between weld thermodynamics and weld thermomechanics. Publication
2000 Visit to the Institute for Mechanical and Aerospace Engineering (Carleton University), Ottawa, Canada, at the invitation of prof. Goldak with the presentation at the scientific seminar.  
2000 Presentation of the cooperation between the DaimlerChrysler Corp. and Tula State University on the occasion of the opening of the Moscow House of the DaimlerChrysler with the presence of his president Mr. Schremmp, vice-president prof. Voehringer and Moscow’s governor Mr. Luzhkov.  
1999 I.V. Dikshev defended his Ph.D. Thesis: “Mathematical Modeling of Laser Welding by Interrupted Seams for Fillet Joints”. Tula, TSU, tutor: prof. W.A. Sudnik.  
1999 L.A. Pavele defended her Ph.D.Thesis: “Analysis of Gas-hydrodynamical Processes in Designing the Technology of Gas-plasma Cutting”. Moscow, MSATU n.a. Tsialkovsky, tutor: W.A. Sudnik.

CUTSIM

1999 Project ELSIM on modeling and simulation of electron beam welding of Ni and Ti structures. Tutor prof. W.A. Sudnik. Executors: W.A. Erofeev and E.W. Karpuchin.  
1999 Prof. W.A. Sudnik, Cand.Sci. R.A. Kudinov, Post. St. O.A. Mokrov, Post.St. O.I. Zaitsev visited Aachen University, Germany.  
1999 Probation of A.F. Zabirov by the grant of Essling Institute, Germany for conducting experiments.  
1998 Project TandemSIM on modeling and simulation of pulsed arc welding of aluminum. Tutor: W.A. Sudnik. Executors: A.S. Rybakov, O.I. Zaitsev.  
1998 R.A. Kudinov defended his Ph.D. Thesis: “Development of Computer System for Mathematical Modeling and Design of Spot Welding”. Moscow, MSATU n.a. Tsialkovsky, tutor: W.A. Sudnik.

SPOTSIM,
DOS v
. 2.0

1998 Probation of E.W. Karpuchin into the Stuttgart University, Germany, by the grant of DFG to work on the MARC and LASIM software.  
1998 2nd All-Russian Scientific and Technical Conference: Computer technologies in Joining of Materials. Collection of the papers
1996 A.V. Ivanov defended his Ph. D. Thesis: “Prediction of the Quality of One-pass Weld Formation in MIG/MAG Welding on the Basis of Mathematical Modeling”. Moscow, MSATU n.a. Tsialkovsky, tutor: W.A. Sudnik.

MAGSIM,
DOS,
v. 1.6

1995 Prof. W.A. Sudnik and Cand. Sci. A.S. Rybakov visited the Aachen University, Germany, by the grant of DFG, to study pulsed arc welding  
1995 1st All-Russian Scientific and Technical Conference: Computer technologies in Joining of Materials Collection of the papers
1995 International Scientific and Educational Center: Computer High Technologies in Joining of Materials was founded  
1994 Letter from the Aachen Institute of Welding to the minister of high education of the Russian Federation to found ComHighTech  
1994 Letter from the Daimler-Benz Corp. to the minister of high education of the Russian Federation to found ComHighTech